Safetoe L-7501 Grey S1P Slip Resistant SRC Sports Safety Shoes

Description

Description:
New Design S1P Safety Shoes
Light Weight Lace-up Safety Shoes is made with Sanvlar Tech Nylon Fabric and PU/PU Dual Density Outsole. It is designed as EN ISO 20345:2011 Quality with S1P category.
√ Upper, Lining & Bonding Strength Test Result Result
Upper Tear Strength ≥ 120.0 Newtons
Upper Tensile Properties ≥ 15.0 N/mm²
Lining Tear Strength ≥ 15.0 N/mm
Bonding Strength ≥ 4.0 N/mm
√ Protection with Composite Toecap (200 Joules) Result
Impact Resistance: Impact Energy: 200 ± 4 Joules, Internal Height Clearence ≥ 14mm Compression Resistance: Compression Force: (15 ± 0.1) KN, Internal Height Clearence ≥ 14mm PASS
√ Penetration Resistance (1100 N)
Result
Penetration Resistance Force ≥ 1100 N PASS
√ Protection With Slip Resistant (SRC) Result
Test Requirement : SRA (Eurotile 2+Nal S) Forward Heel Slip ≥0.28 & Forward Flat Slip: ≥0.32
SRB (Steel Floor+Glycerine) Forward Heel Slip ≥0.13 & Forward Flat Slip: ≥0.18
PASS
Standards : EN ISO20344:2011(5.11) , SRC Means both SRA & SRB requirements are fulfilled.
√ Protection Against Heat Risk 300℃
Result
Test Requirement : The Outsole Did Not Melt & Did Not Develop Any Cracks When Bent Aound Mandrel PASS
Standards : ENISO 20344:2011(8.7). 300℃ HROHeat Resistant
√ Protection Resistant to Fuel Oil Result
Test Requirement : Change in Volume and Change in Hardness (Outsole) is No More Than +12%(*) PASS
Standards : ENISO 20344:2011(8.6.1)
√ Sole Bonding Strength Test
• EN ISO 20344:2011, 5.2 (Between Upper & Sole)
• Average Test Result 5.8±5 (N/mm)
SAFETOE Standard Package Instruction (Average 42# for Reference)
Shoes Weight : 1.1-1.2 KGS /Pair Carton Weight : 12-13 KGS /Carton
1 Pair / Color Box , Dimensions : 32×21×12CM 10 Pair / Carton , Dimensions : 62×43×33CM
User Instructions:
1.) RECOMMENDED TO USE : Construction, Logistics, Mechanics, Glasses Installation, Workshop, Farming, Garden, Oil & Gas, Chemical Factory etc.
2.) LIMITATION TO USE: It is very important that footwear selected must be suitable for the right workplaces. The protection against risks or hazards which are not mentioned in this document is not warranted.
3.) FITTING & SIZE: All footwear are marked with standard size on tongue label. Some are with different size comparation, such as EU size, UK size, US size etc. Please wear footwear in a suitable size Footwear which are too loose or too tight may not provide optimum level of protection.
4.) STORAGE: Keep the footwear in its original packaging, under ordinary temperature, non-humidity conditions and in clean, covered and ventilated premises.
5.) CLEANING: Clean footwear regularly by high quality cleaning treatments recommended as suitable for the purpose. Don’t use caustic or corrosive cleaning agents.